Elsevier

Journal of Materials Research and Technology

Volume 21, November–December 2022, Pages 3025-3037
Journal of Materials Research and Technology

Original Article
Application of the core shell model for strengthening polymer filament interfaces

https://doi.org/10.1016/j.jmrt.2022.10.111Get rights and content
Under a Creative Commons license
open access

Abstract

While surface segregation has been intensively studied in thin films, relatively little has been investigated in filament geometries. In contrast to thin films, the filament surface forms a continuum, with interactions both at the free air and internal filament interface, which makes it difficult to achieve an equilibrium configuration. This asymmetry has become particularly apparent with the increasing use of additive manufacturing where entire structures are constructed via layered deposition of filamentous layers from a moving thermal nozzle. In addition, this process is highly non-equilibrated with poor thermal retention and is responsible for insufficient filament–filament interfacial fusion and internal pore formation along the printing direction. These features all contribute to poor mechanical and structural properties, which are exacerbated in semi-crystalline polymers, such as Polylactic Acid (PLA), where the melting point, Tm, is much higher than the glass transition, Tg. Even though system is liquid the molecules become ordered within the crystal structure and this ordering interferes with interdiffusion, which in turn prevents proper interfacial fusion. Capitalizing on the differential in surface tension, we show that addition of less than 1%, or trace amounts, of longer chain polymers, an oriented core shell structure, will be formed with a self-limiting thickness of three time the radius of gyration, Rg, of the tracer chains. The lower Tg of the tracers and their orientation makes them poised for interdiffusion when subsequent layers are deposited producing structures with significant improvement of the mechanical properties and internal structural integrity.

Keywords

Self-healing
Polymer welding
Polyolefin
Surface segregation
FDM printing

Cited by (0)