|
Sticky
Argonaut VI Repairs
Check with the following. I have no association with either of these independent services. check with Exline Signal, jim @ exlinesignal.com or check with Radiosmith <radiosmith @ tampabay.rr.com> Tent
Check with the following. I have no association with either of these independent services. check with Exline Signal, jim @ exlinesignal.com or check with Radiosmith <radiosmith @ tampabay.rr.com> Tentec Service support in Sevierville TN has been terminated as of December 2021. 73 Bob, K4TAX -- 73 Bob, K4TAX Owner/moderator
By
Bob McGraw - K4TAX
·
|
|
Locked
Sticky
Tentec Notice
Please see the following link as posted on the Tentec website. https://www.tentec.com/parts-and-service-is-discontinued-in-sevierville/ 73 Bob, K4TAX -- 73 Bob, K4TAX Owner/moderator
Please see the following link as posted on the Tentec website. https://www.tentec.com/parts-and-service-is-discontinued-in-sevierville/ 73 Bob, K4TAX -- 73 Bob, K4TAX Owner/moderator
By
Bob McGraw - K4TAX
·
|
|
Locked
Sticky
Radio Update Utility
For those of you who have the 588 Omni VII, the 599 Eagle, or 539 Argonaut VI, please understand the Tentec Update Utility DOES NOT configure the radio automatically to receive Firmware updates. There
For those of you who have the 588 Omni VII, the 599 Eagle, or 539 Argonaut VI, please understand the Tentec Update Utility DOES NOT configure the radio automatically to receive Firmware updates. There instructions in the manual for each of the radios that describes how to specifically configure the radio to receive a Firmware update. Once this is done, then run the Update Utility with the desired version .RUF file to update the radio. [ .RUF is Radio Update File ] To my knowledge, the Update Utility and latest released Firmware along with instructions, does reside in the FILES section of the respective radio on the Groups.IO site. 73 Bob, K4TAX General flunky and formerly radio fixer -- 73 Bob, K4TAX Owner/moderator
By
Bob McGraw - K4TAX
·
|
|
Service/Repairs in VK
7 messages
Can anyone recommend a radio tech in Australia that has experience with late model Ten Tec's (Argo VI or Eagle)? I have a Argonaut VI that needs an alignment and service. David VK4JM
Can anyone recommend a radio tech in Australia that has experience with late model Ten Tec's (Argo VI or Eagle)? I have a Argonaut VI that needs an alignment and service. David VK4JM
|
By
David VK4JM
·
|
|
Pricing Question
15 messages
Folks, when I purchased my 539 it included a 418 amp. I'm mostly QRP so the amp just sits in a box. It is excellent condition with a minor scratch or two on the sides but perfect front, back and top.
Folks, when I purchased my 539 it included a 418 amp. I'm mostly QRP so the amp just sits in a box. It is excellent condition with a minor scratch or two on the sides but perfect front, back and top.
|
By
Pete - WK8S
·
|
|
No More Splatter
I came across this work by G3SEK and though it interesting enough to pass along. http://www.ifwtech.co.uk/g3sek/cleansig/no-splat.htm 73 Bob, K4TAX -- 73 Bob, K4TAX Owner/moderator
I came across this work by G3SEK and though it interesting enough to pass along. http://www.ifwtech.co.uk/g3sek/cleansig/no-splat.htm 73 Bob, K4TAX -- 73 Bob, K4TAX Owner/moderator
|
By
Bob McGraw - K4TAX
·
|
|
Argonaut VI
Hello the time has come I have to part with my trusty Argonaut VI. it’s in perfect condition asking price 950 euro. please contact via my email sq5rix@... for details. My QTH Warsaw Poland 73 Tom
Hello the time has come I have to part with my trusty Argonaut VI. it’s in perfect condition asking price 950 euro. please contact via my email sq5rix@... for details. My QTH Warsaw Poland 73 Tom
|
By
Tom SQ5RIX
·
|
|
Cat control with Raspberry Pi
11 messages
Has anyone out there tried cat control with a Pi? I'm trying to connect to FLdigi and WSJT and I'm missing a step somewhere I think. Thanks, John K7KTM
Has anyone out there tried cat control with a Pi? I'm trying to connect to FLdigi and WSJT and I'm missing a step somewhere I think. Thanks, John K7KTM
|
By
John Rosenkrance - K7KTM
·
|
|
Does Speech Processing (SP) only apply to Mic input, or also to Line In?
4 messages
I haven't yet used my Argonaut VI (which I've owned since 2017) for SSB, but I have a few times for FT8 and WSPR through the back-panel DIN. This weekend I was adjusting the microphone settings for th
I haven't yet used my Argonaut VI (which I've owned since 2017) for SSB, but I have a few times for FT8 and WSPR through the back-panel DIN. This weekend I was adjusting the microphone settings for th
|
By
Kevin Anderson, K9IUA
·
|
|
Replacement microphone
5 messages
Does anyone have a suggestion for a aftermarket 500 ohm dynamic mic? Or a possible Yaesu model that would give good audio? Thank you, John K7KTM
Does anyone have a suggestion for a aftermarket 500 ohm dynamic mic? Or a possible Yaesu model that would give good audio? Thank you, John K7KTM
|
By
John Rosenkrance - K7KTM
·
|
|
Who has used Argonaut VI *and* Elecraft KX2 *and* Elecraft KX3 ?
4 messages
I specifically want to hear from those of you who have experience with the Argonaut VI and both with the Elecraft KX2 *and* KX3. I have not used either Elecraft radio, but feel that one or other is a
I specifically want to hear from those of you who have experience with the Argonaut VI and both with the Elecraft KX2 *and* KX3. I have not used either Elecraft radio, but feel that one or other is a
|
By
Kevin Anderson, K9IUA
·
|
|
File /712 Interface.pdf uploaded
#file-notice
The following files and folders have been uploaded to the Files area of the TentecArgonautVI@groups.io group. /712 Interface.pdf By: Bob McGraw - K4TAX <rmcgraw@...> Description: 712 USB Soundcard Int
The following files and folders have been uploaded to the Files area of the TentecArgonautVI@groups.io group. /712 Interface.pdf By: Bob McGraw - K4TAX <rmcgraw@...> Description: 712 USB Soundcard Int
|
By
Group Notification
·
|
|
Carrying Case Suggestions? More info....
Sorry, I left this out: Search Harbor Freight for "Apache cases" Rich, KA2VCW
Sorry, I left this out: Search Harbor Freight for "Apache cases" Rich, KA2VCW
|
By
Rich Egan
·
|
|
Carrying Case Suggestions?
3 messages
Anyone have a suggestion for a carrying case for the Argo 6 for field use? Pete WK8S
Anyone have a suggestion for a carrying case for the Argo 6 for field use? Pete WK8S
|
By
Pete - WK8S
·
|
|
Anyone added IF out ?
5 messages
Manual indicated connecting connector 15 on TX-RX board to the rear AUX hole adding a RCA jack for adding IF Out @ 9MHz. Has anyone actually done this? I am thinking to add it for a hardware panadapte
Manual indicated connecting connector 15 on TX-RX board to the rear AUX hole adding a RCA jack for adding IF Out @ 9MHz. Has anyone actually done this? I am thinking to add it for a hardware panadapte
|
By
Pete - WK8S
·
|
|
Source for Argonaut VI Mate-n-Lock 2-Pin Plug?
2 messages
I'm looking for a source for the Mate-n-Lock 2-Pin plug used on the Ten-Tec Argonaut VI, and perhaps many others as well. My search has come up dry. I'd like to make up some extra cables so am looking
I'm looking for a source for the Mate-n-Lock 2-Pin plug used on the Ten-Tec Argonaut VI, and perhaps many others as well. My search has come up dry. I'd like to make up some extra cables so am looking
|
By
Richard AG5M
·
|
|
Remote control software for Argonaut VI ?
2 messages
Am working on setting up an Argonaut VI at a remote site to be controlled over the internet and have briefly looked at the N4PY software. Is anyone using it for the Argonaut? Are there others? It will
Am working on setting up an Argonaut VI at a remote site to be controlled over the internet and have briefly looked at the N4PY software. Is anyone using it for the Argonaut? Are there others? It will
|
By
Lewis Downey
·
|
|
Need help with interfacing a 418, what protocol?
2 messages
I know this is a shot in the dark and this is not a 418 focused group, but since the 418 is meant to be controlled by the 539 maybe someone here can give some info. I'm looking to interface a 418 to a
I know this is a shot in the dark and this is not a 418 focused group, but since the 418 is meant to be controlled by the 539 maybe someone here can give some info. I'm looking to interface a 418 to a
|
By
Jason Kitchens - KV4TE
·
|
|
New Argo VI with some issues and missing filters
11 messages
Just acquired a new-to-me Argonaut VI that has only one filter -- the SSB (2.9KHz) filter. I would like to acquire the AM (6KHz filter) if they are available from any source as I would like to use thi
Just acquired a new-to-me Argonaut VI that has only one filter -- the SSB (2.9KHz) filter. I would like to acquire the AM (6KHz filter) if they are available from any source as I would like to use thi
|
By
Carl Jón Denbow - N8VZ
·
|
|
Argonaut VI firmware
8 messages
Folks, All the chat on the Eagle group has prompted me to find and install the latest ver 2 firmware for the Argonaut. However, try as I may, I have been unable to find version 2 anywhere. I know it e
Folks, All the chat on the Eagle group has prompted me to find and install the latest ver 2 firmware for the Argonaut. However, try as I may, I have been unable to find version 2 anywhere. I know it e
|
By
Lee WA3FIY
·
|